 QC 300 series timing belt conveyor
Category: Conveyers
Manufacturer: Lightning Time Savers
Precision Indexing. High Speeds.
- Precision indexing tolerance to register a part to within ±.015" without sensors.
- High speeds up to 2000 fpm with ramp up/down capacity.
- Custom molded cleats to integrate perfectly with your part or application.
- Cleats are high frequency welded to the belt.
- Positive, non-slip timing pulleys.
- Self-aligning drive bearings with seals.
- Bearings can be lubricated rapidly, without drive removal.
- Stepper motors and Servo drives are PLC programmable.
- Optional self-tracking V-guide is thermally welded to the carcass of the belt.
- Nylon coated belt carcass to reduce friction and minimize noise.
- Ability to run multiple bands of belting on one conveyor.
- Timing belts are steel or Kevlar reinforced to offer high load carrying capacities, reduce stretch and allow for precision cleat or profile placement.
- Low profile conveyor—only 3" high.
- Less than 5-minute belt change without removal of drive package or guide rails.
- Widths up to 18" and lengths up to 24' (Special widths and lengths available).
- Heavy duty load carrying capacities.
- High impact resistant single piece formed powder coated 10 gauge steel frame.
- Wide variety of application specific belting.
- Wide variety of Sides, Guides, Mounts, Stands, Drive Packages and Controls.
For More Information About This Product Contact
http://www.qcindustries.com/
|
